Sensor intercalibration is the post-launch comparison and adjustment of one satellite sensor’s radiometric response against other sensors or a common reference so that their measurements agree.12
It is a narrower kind of calibration than radiometric calibration in general. NASA’s joint optical guidelines list inter-calibration with other satellite sensors among the post-launch methods, beside vicarious calibration to in-situ reference measurements and calibration to simulated radiances from pseudo-invariant calibration sites.1 CEOS advises data producers to coordinate cross-calibration of at-sensor products using uniform reference surfaces to minimise overall biases between sensors.2 One technique described in the guidelines removes calibration trends among different sensors and allows cross-calibration to a common reference.1
Differences vary with the sensors and surfaces compared. A CEOS presentation puts the radiometric differences between Landsat 8 and Sentinel-2 at approximately 2%, and says responses can differ by as much as 17% for different surface types if SBAF corrections are not applied.2 Those figures come from one presentation and are not a general result.
Uncertainty is the main limit. The guidelines note that rigorous uncertainty analysis and traceability are not always available for common post-launch methods.1 NASA Earthdata says only that processed data can carry ancillary radiometric and geometric calibration coefficients and does not mention intercalibration.3
Footnotes
-
NASA Science, “Joint Earth Observation Mission Quality Assessment Framework, Optical Guidelines”. https://science.nasa.gov/wp-content/uploads/2026/05/joint-optical-guidelines-jul2025-signed.pdf ↩ ↩2 ↩3 ↩4
-
CEOS, “Moderate Resolution Sensor Interoperability (plenary 31 presentation)”. https://ceos.org/document_management/Meetings/Plenary/31/Presentations/8.5_Fosnight_MRI_FINAL_10.6.17.pdf ↩ ↩2 ↩3
-
NASA Earthdata, “Data Processing Levels”. https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/data-processing-levels ↩