Earth observation processing is the staged conversion of raw instrument measurements into calibrated, derived and gridded data products, labelled by processing level.12
NASA processes its Earth Observing System data products at levels from Level 0 to Level 4, where Level 0 products are raw data at full instrument resolution and the data at higher levels are converted into more useful parameters and formats.1 Level 1A data are time-referenced and annotated with ancillary information, Level 2 holds derived geophysical variables at the same resolution and location as the Level 1 source data, Level 3 maps variables onto a uniform space-time grid, and Level 4 is model output or the results of analyses of lower-level data.1
Radar providers follow the same idea. The SAR Handbook says that providers offer imagery in a range of processing levels, each progressively simplified and tailored to emphasise different components of the SAR information space.2
A processing level records how far a product has been taken from the raw measurement, so it describes lineage and form rather than quality. NASA also notes that some products, such as near real-time data, are made available more quickly than standard processing.1 The retained sources do not establish a single level scheme shared by every agency, mission or sensor type, and the Level 3 and Level 4 descriptions are NASA wording only.12
Footnotes
-
NASA Earthdata, “Data Processing Levels”. https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/data-processing-levels ↩ ↩2 ↩3 ↩4 ↩5
-
NASA Earthdata (SAR Handbook), “Spaceborne Synthetic Aperture Radar: Principles, Data Access, and Basic Processing Techniques”. https://earthdata.nasa.gov/s3fs-public/2025-04/SARHB_CH2_Content.pdf ↩ ↩2 ↩3