A calibrated data state is the processing state of data to which a calibration process has been applied, relating instrument indications to values realized by standards.12

SWEET defines Calibrated as a subclass of DataState restricted to data that had some Calibration process.1 NIST Technical Note 1551 defines calibration as a set of operations that establish the relationship between values indicated by a measuring instrument and the corresponding values realized by standards, and says the result permits assigning values of measurands to the indications or determining corrections to them.2

NASA’s Level 1A description records radiometric and geometric calibration coefficients as ancillary information, and Level 1B data are Level 1A data processed to instrument units.3 NOAA describes its AMSR-2 Level 2 products as calibrated, corrected, reformatted and flagged.4 The retained sources do not establish at which processing level calibration is applied for every instrument, so the state is bounded by the process that produced it rather than by a level number.

Footnotes

  1. ESIP Federation (SWEET), “SWEET stateDataProcessing.ttl”. https://raw.githubusercontent.com/ESIPFed/sweet/master/src/stateDataProcessing.ttl ↩ ↩2

  2. NIST and IEEE GRSS, “Recommended Terminology for Microwave Radiometry (NIST Technical Note 1551)”. https://www.grss-ieee.org/wp-content/uploads/2009/09/TN1551.pdf ↩ ↩2

  3. NASA Earthdata, “Data Processing Levels”. https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/data-processing-levels ↩

  4. NOAA, “AMSR-2 Microwave Brightness Temperatures”. https://vlab.noaa.gov/web/towr-s/amsr-2-mbt ↩