Tropospheric delay is the extra GNSS signal-path delay conventionally attributed to the electrically neutral lower atmosphere.
In GNSS and geodesy, the term often describes neutral-atmosphere propagation along the full satellite-to-receiver path. At GNSS microwave frequencies this delay is treated as non-dispersive: it lengthens both code and carrier path observations, unlike the frequency-dependent ionospheric effect.1
Models commonly separate the zenith hydrostatic (often called dry) delay from the zenith wet delay, then map each component to the satellite’s slant elevation path. Surface pressure provides a useful estimate of the more predictable hydrostatic contribution; water vapour makes the wet component more variable. The mapping function, meteorological data, local gradients and elevation all affect the correction and its residual.12
A low-elevation line of sight has a longer path through the neutral atmosphere and is more sensitive to mapping and local model errors than a near-zenith path. A correction is therefore an estimate, not proof that the remaining coordinate error is negligible.12
Galileo’s published tropospheric-model description documents an older model with ERA-15-derived coefficients. It helps explain the hydrostatic/wet and mapping structure, but the source does not establish that model as the current operational receiver algorithm.1