Total ionising dose is the cumulative long-term damage to electronics caused by solar and trapped protons and trapped electrons.1

In microelectronics, the Barth, LaBel and Poivey paper states that this damage causes threshold shifts, leakage current and timing skews. The effect first appears as parametric degradation of a device and can ultimately result in functional failure. NASA lists it alongside single-event effects and total non-ionising dose as radiation effects on electronics, and treats them through radiation hardness assurance, an iterative process that assesses radiation threats and develops mitigation at hardware, software and operational levels.12

Shielding material absorbing most electrons and lower-energy protons can reduce the dose, with diminishing effectiveness as shielding is increased. Testing involves exposing a device to an ionising radiation environment while measuring its electrical performance under varied operating conditions. A NASA small-spacecraft report adds that monocoque structures increase surface area to potentially reduce the dose, which is a hedged design benefit rather than a measured one.13

Dose is a cumulative quantity and differs from single-event effects, which are caused by individual particles. The sources retained here give no dose limits or part ratings, so any tolerance figure for a part or mission needs its own test data and mission environment.12

Footnotes

  1. J. L. Barth, K. A. LaBel and C. Poivey, Radiation assurance for the space environment, NASA Technical Reports Server 20040070939. https://ntrs.nasa.gov/api/citations/20040070939/downloads/20040070939.pdf ↩ ↩2 ↩3 ↩4

  2. NASA, “Radiation”, reference page, updated January 2026. https://www.nasa.gov/reference/jsc-radiation/ ↩ ↩2

  3. NASA SmallSat Institute, Small Spacecraft Technology State of the Art, Structure, Mechanisms, and Materials chapter, 2026 edition. https://www.nasa.gov/wp-content/uploads/2026/05/6-soa-structures-2026-final.pdf ↩