A thermal louver is a thermally activated shutter assembly that regulates how much heat a covered surface can dissipate by changing the surface’s effective emission.12

As the louvers open, the average infrared emissivity of the surface changes, and so does the heat it dissipates.1 The blades are commonly positioned by bimetallic elements similar to those in a thermostat, which drive them open when internal temperatures are high and closed when they are low.2 The NASA guidebook describes a louver as a type of thermal switch actuated by a bimetallic spring.3

NASA Science says louvers can reduce the electrical power used for heaters and help adapt to changes in the environment.2 NASA’s small-spacecraft report says full-sized louvers on larger spacecraft are effective, while integration on small spacecraft is challenging because typical louvers carry greater mass and input power.1

Louvers are commonly defined as active thermal control, yet the same report treats a CubeSat-adapted design as passive because it needs no spacecraft power, so classification depends on the design.1 The sources cited here give no performance figures for a particular louver.

Footnotes

  1. NASA Small Spacecraft Systems Virtual Institute, “7.0 Thermal Control”, State-of-the-Art of Small Spacecraft Technology, May 2026. https://www.nasa.gov/smallsat-institute/sst-soa/thermal-control/ ↩ ↩2 ↩3 ↩4

  2. NASA Science, “Chapter 11: Onboard Systems”, Basics of Space Flight. https://science.nasa.gov/learn/basics-of-space-flight/chapter11-4/ ↩ ↩2 ↩3

  3. NASA, NASA Passive Thermal Control Engineering Guidebook, revision 4.0, 25 September 2023. https://ntrs.nasa.gov/api/citations/20230013900/downloads/NASA%20Thermal%20Control%20Engineering%20Guidebook%20v4.pdf ↩