Spin stabilisation is a method of holding a spacecraft’s attitude by setting the whole vehicle spinning so that the gyroscopic action of the rotating mass acts as the stabilising mechanism.1
NASA describes thrusters that are fired only occasionally to change the spin rate or the spin-stabilised attitude, so the attitude is not continuously actuated. Pioneer 10 and 11, Lunar Prospector and the Galileo orbiter and its atmospheric probe are given as examples of spinning spacecraft.1 A spinning vehicle also provides a continuous sweeping motion, which the same source says suits fields and particles instruments and some optical scanning instruments.1
Smallsat guidance notes mention that magnetic torquers can slowly spin up a spinner by applying an external torque over time, and that thrusters can supply the large torques used for spin stabilisation. That chapter concentrates on three-axis controlled small spacecraft, so it treats spinners briefly.2
Sources opened here do not give spin rates, stiffness figures or pointing accuracy for spinners, and do not compare spin stabilisation with three-axis control quantitatively. Dual-spin designs are not covered, so the term applies to a vehicle spun as a whole.12
Footnotes
-
NASA/JPL, Basics of Space Flight, Chapter 11 Onboard Systems (page two). https://science.nasa.gov/learn/basics-of-space-flight/chapter11-2/ ↩ ↩2 ↩3 ↩4
-
NASA Smallsat Institute, “Guidance, Navigation, and Control”, State-of-the-Art chapter 5.0. https://www.nasa.gov/smallsat-institute/sst-soa/guidance-navigation-and-control/ ↩ ↩2