Spacecraft redundancy is the provision of backup components, with means to reroute function to them, so that a spacecraft can maintain or restore function after a component fails.1
NASA states that most components on which mission success depends have redundant backups, which can be brought into use autonomously or by real-time command. It attributes the extended missions of several deep-space spacecraft to on-board redundant transmitters, receivers, tape recorders, gyroscopes and antennas.1
NASA’s small-spacecraft survey treats redundancy as a design choice: an avionics system can be single-string or redundant, depending on required performance, bandwidth, environmental robustness and risk tolerance.2
Standards reflect the practice. The ECSS standard for MIL-STD-1553B addresses devices on a single, redundant data bus, and the ECSS testing standard includes requirements for redundancy testing. The sources do not set out redundancy schemes or reliability figures.34
Footnotes
-
NASA Science, “Chapter 11: Onboard Systems” (mechanical devices and redundancy sections), Basics of Space Flight. https://science.nasa.gov/learn/basics-of-space-flight/chapter11-4/ ↩ ↩2
-
NASA Small Spacecraft Systems Virtual Institute, “Small Spacecraft Avionics”, State-of-the-Art of Small Spacecraft Technology. https://www.nasa.gov/smallsat-institute/sst-soa/small-spacecraft-avionics ↩
-
ECSS, ECSS-E-ST-50-13C: Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft, 15 November 2008. https://ecss.nl/standard/ecss-e-st-50-13c-interface-and-communication-protocol-for-mil-std-1553b-data-bus-onboard-spacecraft/ ↩
-
ECSS, ECSS-E-ST-10-03C Rev.1: Testing, 31 May 2022. https://ecss.nl/standard/ecss-e-st-10-03c-rev-1-testing/ ↩