A space-to-space link is a communications hop between two space-borne endpoints.

Also called a crosslink, it can connect a spacecraft to a relay satellite, another satellite or a nearby peer in a proximity network. The link may use RF or optical communication. “Crosslink” does not imply that endpoints share an orbit, constellation, operator or protocol.123

Direction is defined between the two space endpoints or by a mission’s network roles. A crosslink is not an Earth-to-space uplink or space-to-Earth downlink simply because traffic ultimately travels from or to Earth. CCSDS 401 uses the historical terms “forward” and “return” for space-to-space directions; these depend on the link convention and should be defined where they matter.4

For nearby mission links, CCSDS Proximity-1 specifies a bidirectional radio protocol for communication among spacecraft, probes, landers, rovers and relays. The approved Issue 6 data-link standard opened here is dated July 2020. A later Issue 6.2 item is labelled a draft review document; the end of its review period does not make it an approved standard.25

Optical inter-satellite links can provide relay paths with high data rates, but terminals must acquire, point to and track one another. Performance and availability therefore depend on terminal capability and geometry; a demonstration does not set a service level for every constellation. NASA’s ILLUMA-T/LCRD account documents a two-way optical relay demonstration and delay/disruption-tolerant networking experiments. A relayed route still comprises distinct hops, each dependent on its own coverage, scheduling, protocol support and ground access.13

Footnotes

  1. https://www.nasa.gov/smallsat-institute/sst-soa/soa-communications/ ↩ ↩2

  2. https://ccsds.org/Pubs/211x0b6e1.pdf ↩ ↩2

  3. https://www.nasa.gov/directorates/stmd/tech-demo-missions-program/laser-communications-relay-demonstration-lcrd-overview/ ↩ ↩2

  4. https://ccsds.org/Pubs/401x0b32.pdf ↩

  5. https://ccsds.org/review/ccsds-211-0-p-6-2/ ↩