Below the water table, the saturated zone is the part of the subsurface in which the voids are completely filled with water.12

USGS gives the water table as the upper surface of the saturated zone, and says that water pressure below it is great enough for water to enter wells.13 Water in the zone is referred to as ground water, a usage Physics Today calls traditional, where water flows freely into wells under pore pressure greater than atmospheric pressure.12

Above it lies the unsaturated zone, where the spaces contain both air and water and where water cannot be pumped by wells because capillary forces hold it too tightly.32 USGS describes a transition zone called the capillary fringe between the unsaturated zone and the water table.1

SWEET lists the class as a hydrosphere feature without a definition.4 The retained sources give no typical depths or thicknesses and say nothing of detecting the zone from space.13

Footnotes

  1. U.S. Geological Survey, “General Facts and Concepts about Ground Water” (Circular 1186). https://pubs.usgs.gov/circ/circ1186/html/gen_facts.html ↩ ↩2 ↩3 ↩4 ↩5

  2. Physics Today (AIP), “Introducing groundwater physics”. https://physicstoday.aip.org/features/introducing-groundwater-physics ↩ ↩2 ↩3

  3. U.S. Geological Survey, “Ground Water and Surface Water A Single Resource, Box A: Concepts of Ground Water, Water Table, and Flow Systems” (Circular 1139). https://pubs.usgs.gov/circ/circ1139/htdocs/boxa.htm ↩ ↩2 ↩3

  4. ESIP SWEET, “realmHydro.ttl”. https://raw.githubusercontent.com/ESIPFed/sweet/master/src/realmHydro.ttl ↩