A potentiometric surface is an imaginary surface representing the elevation and pressure head of groundwater, defined by the level to which water rises in a well or piezometer.12

USGS ties the term to confined aquifers, where the surface represents the potential height to which water will rise in wells completed in the aquifer.2 BGS says the groundwater level in a confined aquifer is more properly described as a potentiometric surface, the theoretical level to which water would rise if the confining layer were not present.3

BGS adds that the water table is a particular potentiometric surface, and that the term replaces the earlier piezometric surface.1 Where several aquifers lie in a vertical sequence there may be several distinct water levels, and the surface may vary with depth where vertical flow is significant.3

SWEET lists the class as a hydrosphere feature without a definition.4 The retained sources give no contouring method, no pressure or elevation figures, and nothing on mapping the surface from space, so the page bounds the term to its physical definition.13

Footnotes

  1. British Geological Survey, “Glossary - BGS Groundwater”. https://www.bgs.ac.uk/groundwater/glossary/ ↩ ↩2 ↩3

  2. U.S. Geological Survey, “Hydraulic Head and Factors Causing Changes in Ground Water Levels” (Circular 1217, Box A). https://pubs.usgs.gov/circ/circ1217/html/boxa.html ↩ ↩2

  3. British Geological Survey, “Groundwater level terminology”. https://www.bgs.ac.uk/groundwater/data/groundwater-levels/groundwater-level-terminology/ ↩ ↩2 ↩3

  4. ESIP SWEET, “realmHydro.ttl”. https://raw.githubusercontent.com/ESIPFed/sweet/master/src/realmHydro.ttl ↩