Off-nadir angle describes how far a sensor’s viewing direction departs from nadir, the point on the Earth’s surface directly below the satellite.12

The Canadian tutorial defines the nadir point in its account of orbit cycles and refers to pixels away from nadir as off-nadir. It does not define the angle formally or fix a reference for measuring it, so the sign convention and the vertical reference remain unresolved here.12

For a scanner whose instantaneous field of view stays constant, the tutorial states that pixels at nadir represent a smaller ground area than those off-nadir, so spatial resolution varies from the image centre to the swath edge.2 The statement applies to that scanning geometry and does not describe every sensor or pointing mode.

ESA notes that Sentinel-2 areas are revisited every five days under the same viewing conditions in the nominal configuration, and that overlap between swaths of adjacent orbits can produce revisits under different viewing conditions.3 The page does not call this off-nadir pointing.

Footnotes

  1. Natural Resources Canada, “Satellite Characteristics: Orbits and Swaths”. https://natural-resources.canada.ca/maps-tools-publications/satellite-elevation-air-photos/satellite-characteristics-orbits-swaths ↩ ↩2

  2. Natural Resources Canada, “Spatial Resolution, Pixel Size, and Scale”. https://natural-resources.canada.ca/maps-tools-publications/satellite-elevation-air-photos/spatial-resolution-pixel-size-scale ↩ ↩2 ↩3

  3. ESA, “S2 Mission”, SentiWiki. https://sentiwiki.copernicus.eu/web/s2-mission ↩