A lidar instrument is a remote sensing device that uses a pulsed laser to measure ranges to the Earth.1
NOAA states that an airborne lidar instrument principally consists of a laser, a scanner and a specialised GPS receiver, and that aircraft and helicopters are the most commonly used platforms for covering broad areas. The light pulses, combined with other data recorded by the airborne system, produce three-dimensional information about the shape of the Earth and its surface characteristics.1
Lidar is an active sensor. NOAA contrasts active sensors, which use internal stimuli, with passive sensors that record reflected or emitted energy, and uses a laser that times its own return as the example of an active system.2 NOAA separates topographic lidar, which typically uses a near-infrared laser to map land, from bathymetric lidar, which uses water-penetrating green light to measure seafloor and riverbed elevations.1
The NOAA component list describes airborne survey systems. NASA describes ATLAS on ICESat-2 by its tasks of sending pulses, collecting returning photons and recording travel time, so the sources do not establish that a spaceborne photon-counting instrument shares the same parts.3 Lidar the technique and lidar the instrument are also easy to conflate; this page concerns the equipment, and the sources give no performance figures.13
Footnotes
-
NOAA National Ocean Service, “What is lidar?”. https://oceanservice.noaa.gov/facts/lidar.html ↩ ↩2 ↩3 ↩4
-
NOAA National Ocean Service, “What is remote sensing?”. https://oceanservice.noaa.gov/facts/remotesensing.html ↩
-
NASA Earthdata, “Advanced Topographic Laser Altimeter System”. https://www.earthdata.nasa.gov/data/instruments/atlas ↩ ↩2