A halo orbit is a three-dimensional periodic trajectory near a collinear Lagrange point in a restricted three-body model, usually described in the frame rotating with the two primaries.12

Orbit family and terminology

A halo orbit is not a Keplerian ellipse around a body at L1, L2 or L3. It is one member of a family of solutions produced by the coupled gravity of the primaries and motion in the rotating frame. NASA/JPL’s periodic-orbit catalogue distinguishes halo families from planar Lyapunov, vertical, resonant and other three-body families, with family-specific branches and stability data.3

In a simplified near-equilibrium picture, in-plane and out-of-plane oscillations can synchronise to form a periodic halo solution. Nearby choices whose frequencies do not synchronise generally produce quasi-periodic Lissajous trajectories. Public mission material sometimes uses these labels loosely, so a technical description should state whether it means the mathematical CR3BP family or an operational trajectory that is only approximately periodic in an ephemeris model.24

Halo families include near-rectilinear Earth-Moon solutions considered for cislunar mission design. A selected family and amplitude depend on access, eclipse, communication, science, collision-avoidance and control constraints. A mission concept or simulation is not evidence that a proposed orbit has been flown.13

Insertion, navigation and station keeping

Collinear-point halo solutions have unstable modes. Navigation estimates and corrections therefore matter: orbit determination sets the current state and covariance, while targeting methods use the mission force model to calculate a correction that returns the trajectory to its allowed path. Solar-radiation pressure, other bodies, manoeuvre execution and attitude constraints change the realised motion and the maintenance demand.25

JWST is an operational Sun-Earth L2 halo-orbit example. STScI’s mission documentation reports an orbit period of about six months and station-keeping on average every 42 days, with manoeuvres skipped when the computed correction is negligible. Solar-radiation pressure on its large sunshield and the mission’s attitude profile contribute to the control problem. Those values describe JWST, not a general halo-orbit cadence or cost.6

UK research documents techniques rather than ownership of a flown mission. Surrey lists orbit maintenance of periodic and quasi-periodic trajectories as an astrodynamics research area. A University of Glasgow repository paper analyses halo-family selection and maintenance for the proposed Hevelius lunar microsatellite study; its candidate mission is not presented here as flown.78

A useful operational record identifies the primary pair and rotating frame, reference orbit family and phase, ephemeris and force model, orbit-determination epoch and covariance, manoeuvre history, station-keeping constraints, and validity interval. “Halo orbit” by itself does not specify those data or establish flight accuracy.365

References

Footnotes

  1. Breckenridge et al., “The Circular Restricted 3-Body Problem”, AAS 22-1292. ↩ ↩2

  2. S. Gordon, “Orbit Determination Error Analysis and Comparison of Station-Keeping Costs for Lissajous and Halo-Type Libration Point Orbits”, 1993. ↩ ↩2 ↩3

  3. NASA/JPL, Three-Body Periodic Orbits API documentation. ↩ ↩2 ↩3

  4. R. Farquhar and A. Kamel, “Quasi-periodic orbits about the translunar libration point”, 1973. ↩

  5. J. Petersen, “L2 Station Keeping Maneuver Strategy for the James Webb Space Telescope”, 2019. ↩ ↩2

  6. Space Telescope Science Institute, JWST Orbit. ↩ ↩2

  7. University of Surrey Space Centre, “Astrodynamics research”. ↩

  8. Pirovano et al., “Halo orbit determination in the mission analysis of the Hevelius-Lunar Microsatellite Mission”, University of Glasgow repository. ↩