Ground-based remote sensing is remote sensing in which the instrument is carried on the ground or on a ground-level support such as a vehicle, tower or tethered balloon, rather than on an aircraft or satellite.12
Natural Resources Canada defines remote sensing as acquiring information about a surface without contact, by recording reflected or emitted energy, and notes that it includes non-imaging sensors. The UCGIS body of knowledge lists hand-held cameras, cranes, ground vehicles, tethered balloons and towers as ground-based platforms. It says they typically give views from up to 50 metres above ground and are useful for low-altitude imagery with frequent coverage of dynamic phenomena.12
Fixed instruments form networks. NASA Goddard describes the Micro-Pulse Lidar Network as ground-based lidar systems co-located with sun and sky photometer sites of the Aerosol Robotic Network. It also lists satellite sensor calibration and model validation among the uses of its atmospheric profiling instruments.3
None of the sources gives a formal definition of the term, so its boundary with in situ measurement and with airborne work is a matter of usage. The examples here are drawn from the cited pages and do not cover all ground-based sensing.123
Footnotes
-
UCGIS GIS&T Body of Knowledge, “Remote Sensing Platforms”. https://gistbok-ltb.ucgis.org/current/concept/DC-03-026 ↩ ↩2 ↩3
-
Natural Resources Canada, “Fundamentals of Remote Sensing - Introduction”, modified 2025-01-08. https://natural-resources.canada.ca/maps-tools-publications/satellite-elevation-air-photos/fundamentals-remote-sensing-introduction ↩ ↩2 ↩3
-
NASA Goddard Earth Sciences, “Atmospheric Profiling”. https://earth.gsfc.nasa.gov/meso/research/atmospheric-profiling ↩ ↩2