Geoid undulation is the separation between the geoid and the reference ellipsoid at a given latitude and longitude, which Ordnance Survey calls the geoid-ellipsoid separation N.1

Ordnance Survey relates ellipsoid height to orthometric height by adding N to the orthometric height, under simplifying assumptions about the level surfaces through the points.1 N varies in a complex way with latitude and longitude, and a lookup table of N values is called a geoid model.1 None of the opened sources uses the word undulation itself, so the page relies on the separation wording.

In practice GNSS supplies the ellipsoid height and a geoid model supplies N, so the two together give orthometric height.1 The OSGM15 model is described as a grid of separation values at 1 kilometre resolution from which a value is found by bilinear interpolation.1 Height differences between nearby points are more accurate than absolute heights because much of the error is common to both.1

N is measured to an equipotential surface that best fits mean sea level.23 Sign and accuracy depend on the geoid model and datum chosen, and the accuracy figures Ordnance Survey gives belong to its own model and edition.1

Footnotes

  1. Ordnance Survey, A Guide to Coordinate Systems in Great Britain, version 3.6, 2020. https://www.ordnancesurvey.co.uk/documents/resources/guide-coordinate-systems-great-britain.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7

  2. Open Geospatial Consortium, Geographic information: Spatial referencing by coordinates, OGC Abstract Specification Topic 2, 18-005r5. https://docs.ogc.org/as/18-005r5/18-005r5.html ↩

  3. NOAA National Ocean Service, “What is the geoid?”. https://oceanservice.noaa.gov/facts/geoid.html ↩