A GNSS signal is a radio-frequency waveform transmitted by a navigation satellite for user equipment to acquire and track.
A specified signal can combine a carrier with satellite-specific ranging codes and, on a data component, navigation symbols. Ranging codes support signal identification and code-delay measurement; some designs include pilot components without navigation data to assist acquisition or tracking. Signal components, modulation and data content differ by constellation, frequency band and interface revision.12
Signal-in-space waveforms are distinct from the GNSS antenna and from a receiver’s processing. The received signal is affected by antenna response, propagation, obstruction and interference, as well as receiver bandwidth and tracking design. Accordingly, a constellation’s signal-in-space performance specification does not guarantee a particular receiver’s availability or accuracy in its operating environment.34
Galileo Open Service signal requirements are defined in OS SIS ICD v2.2, listed as in force by the European GNSS Service Centre and dated November 2025. GPS signal-to-user interfaces are defined in interface specifications including IS-GPS-200N, dated August 2022; GPS.gov also lists a June 2026 revision notice. Implementers should check the applicable current documents and notices rather than rely on a generic or older waveform description.156
Footnotes
-
https://www.gsc-europa.eu/electronic-library/programme-reference-documents/galileo-in-force/open-service ↩ ↩2
-
https://www.gsc-europa.eu/sites/default/files/sites/all/files/Galileo_OS_SIS_ICD_in_force.pdf ↩
-
https://archive.gps.gov/technical/ps/2020-SPS-performance-standard.pdf ↩
-
https://www.gps.gov/interface-control-documents-icds-interface-specifications-iss ↩
-
https://www.gps.gov/sites/default/files/2025-07/IS-GPS-200N.pdf ↩