GNSS interference is radio-frequency energy that disrupts the reception or use of GNSS signals, and it ranges from jamming, which overpowers authentic signals, to spoofing, which transmits a false signal mimicking an authentic one.1

The FAA Interference Resource Guide, written for United States operators and pilots, describes jamming as the broadcast of a signal that overpowers authentic satellite signals and spoofing as the transmission of a false signal mimicking the authentic one, which may carry altered location or timing data. It also records less frequent unplanned events linked to faulty commercial equipment and to inadvertent re-radiation of GNSS signals near airports.1

A 2015 European GNSS Agency workshop report refers to both intentional and unintentional jamming, and to effects on the signal-to-noise ratio and on timing and navigation data. The GPS performance standard acknowledges that local interference is one of several conditions that can make signals temporarily untrackable.23

These sources describe the phenomenon and aviation consequences rather than a measured rate of occurrence. The FAA guide is a revision-controlled operational document and the workshop report is an archived news item, so neither establishes current incident levels or detection method performance.12

Footnotes

  1. US Federal Aviation Administration, GNSS Interference Resource Guide, version 1.1, March 2026. https://www.faa.gov/about/office_org/headquarters_offices/avs/offices/afx/afs/afs400/afs410/GNSS/GPS_GNSS_Interference_Resource_Guide.pdf ↩ ↩2 ↩3

  2. European GNSS Agency, “GSA hosted Workshop on RFI threats to GNSS receivers”, news item of 13 October 2015 (archived). https://www.euspa.europa.eu/newsroom-events/news-archive/gsa-hosted-workshop-rfi-threats-gnss-receivers ↩ ↩2

  3. US Department of Defense, Global Positioning System Standard Positioning Service Performance Standard, 5th edition, April 2020. https://navcen.uscg.gov/sites/default/files/pdf/gps/geninfo/2020SPSPerformanceStandardFINAL.pdf ↩