A GNSS code measurement is the receiver’s estimate of the timing alignment between a received spreading code and a locally generated code replica.
Receiver baseband processing correlates incoming samples with a local pseudo-random-noise code replica over candidate delays. A code-tracking loop refines the delay estimate. Depending on the interface, the result may be reported in seconds, code chips or range-equivalent metres; multiplying a time delay by c converts it to a distance-like quantity.12
Code measurement describes timing alignment at a processing stage. A pseudorange is the range-scaled observable interpreted with receiver and satellite clock offsets and other biases. In RINEX, C identifies pseudorange observations and those values are stored in metres. Usage varies across technical writing and receiver APIs, so the term and units should be stated where ambiguity is possible.123
Code delay depends on the signal and tracking mode. Ionospheric group delay, receiver and satellite hardware delays, multipath and receiver noise affect the resulting pseudorange; inter-channel calibration and signal-specific corrections may be needed for combined measurements.14