An Earth observation Level 2 data product holds derived geophysical variables at the same resolution and location as its Level 1 source data.12

Derivation is algorithmic: NOAA describes Level 1b data being used in scientific algorithms to derive geophysical parameters, which are termed Level 2 data, and the Metrologia review says the defining characteristic of L2 products is that retrieved geophysical variables are presented on the L1 image co-ordinates.34 CEOS gives sea surface temperature and leaf area index as examples of such parameters.2

Because a Level 2 product keeps the sampling of the source measurements, the locations of observations do not exactly repeat between orbits and data volumes may be large.4 Level 3 products are generated for applications that tolerate lower spatiotemporal sampling, so Level 2 is the form to use where maximum spatial resolution is needed.4

NASA notes that most Earth Observing System instruments have standard data products at Level 2 and Level 3.1 The retained sources do not establish the accuracy or uncertainty of any particular Level 2 product, and the Metrologia review warns that sub-categories such as L2P are not fully standardised across agencies and projects, so a product’s own documentation governs its content.4

Footnotes

  1. NASA Earthdata, “Data Processing Levels”. https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/data-processing-levels ↩ ↩2

  2. CEOS Cal/Val Portal, “Processing Levels”. https://calvalportal.ceos.org/cal/val-wiki/-/wiki/CEOS_Terms_and_Definitions/Processing+Levels/pop_up ↩ ↩2

  3. NOAA NESDIS STAR, “Satellite Data Processing Levels”. https://www.star.nesdis.noaa.gov/atmospheric-composition-training/satellite_data_processing_levels.php ↩

  4. Metrologia (IOP Publishing), “Applying principles of metrology to historical Earth observations from satellites”. https://iopscience.iop.org/article/10.1088/1681-7575/ab1705 ↩ ↩2 ↩3 ↩4