An Earth observation Level 0 data product is the lowest processing level of satellite data, consisting of raw instrument and payload data before calibration or geolocation.12

NASA defines Level 0 as reconstructed, unprocessed instrument and payload data at full resolution, with communications artefacts such as synchronisation frames, headers and duplicate data removed. Its processing-level page summarises Level 0 products as raw data at full instrument resolution.1

Its form depends on the mission. Sentinel-2 Level-0 is raw image data in on-board compressed Instrument Source Packet format, and Sentinel-1 Level-0 contains raw SAR data from unprocessed Instrument Source Packets, divided into several product classes.34 For SAR the handbook notes that raw data do not give a useful picture of the scene until aperture synthesis processing, and that some operators do not release them.2

Level 0 is the input to higher levels, and a Level 0 product should not be treated as an image or as physical measurements without further processing. Which Level 0 products are public varies by sensor and operator, and the sources here do not give a general rule.42

Footnotes

  1. NASA Earthdata, “Data Processing Levels”. https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/data-processing-levels ↩ ↩2

  2. NASA Earthdata, The SAR Handbook, Chapter 2 (SAR data products). https://earthdata.nasa.gov/s3fs-public/2025-04/SARHB_CH2_Content.pdf ↩ ↩2 ↩3

  3. ESA Copernicus SentiWiki, “Sentinel-2 Processing”. https://sentiwiki.copernicus.eu/web/s2-processing ↩

  4. ESA Copernicus SentiWiki, “Sentinel-1 Processing”. https://sentiwiki.copernicus.eu/web/s1-processing ↩ ↩2