Confined bed is not a defined term in the retained hydrogeological sources, which use confining bed for the low-permeability layer that holds an aquifer under pressure and confined for the condition of the aquifer below it.12

Western Oregon University defines a confining bed as a body of impermeable or distinctly less permeable material stratigraphically adjacent to one or more aquifers.1 The Groundwater Project describes a confined aquifer as one occurring beneath an aquitard, often called a confining bed.2

USGS nomenclature guidance prefers confining unit to confining bed where more than a single bed makes up the layer, which limits where the word bed is appropriate.31 This page therefore treats a confined bed as a bed whose water or pressure is confined by an adjoining confining bed, and that reading is an inference from the sources, not a quotation.12

Retained sources do not establish a standalone definition of confined bed or any figure for it, and they do not describe it from remote sensing.23

Footnotes

  1. Western Oregon University, “Glossary of Hydrologic Terms”. https://people.wou.edu/~taylors/nssi/glossary.htm ↩ ↩2 ↩3 ↩4

  2. The Groundwater Project, “6.3 Confined Aquifers”. https://books.gw-project.org/hydrogeologic-properties-of-earth-materials-and-principles-of-groundwater-flow/chapter/confined-aquifers/ ↩ ↩2 ↩3 ↩4

  3. U.S. Geological Survey, “Aquifer-Nomenclature Guidelines (Open-File Report 86-534)”. https://pubs.usgs.gov/of/1986/0534/report.pdf ↩ ↩2