Confined aquifer is an aquifer bounded above and below by confining units of distinctly lower permeability than the aquifer itself, so that its water is held under pressure.12

Western Oregon University adds that confined describes a condition in which the potentiometric surface is above the top of the aquifer, which it treats as synonymous with artesian.1 The Groundwater Project says water levels in tightly cased wells rise above the top of the aquifer, and that the surface to which water rises defines the potentiometric surface.2

USGS Circular 1217 attributes the pressure to a geological body much less permeable than the aquifer, and USGS Circular 1186 notes that a confined aquifer stays fully saturated while pumping reduces head and pressure.34 That response differs from an unconfined aquifer, where the water table itself falls.24

Many aquifers are intermediate between confined and unconfined, and the retained sources give no numerical threshold separating them. They describe confinement from well observations rather than from Earth observation data.34

Footnotes

  1. Western Oregon University, “Glossary of Hydrologic Terms”. https://people.wou.edu/~taylors/nssi/glossary.htm ↩ ↩2

  2. The Groundwater Project, “6.3 Confined Aquifers”. https://books.gw-project.org/hydrogeologic-properties-of-earth-materials-and-principles-of-groundwater-flow/chapter/confined-aquifers/ ↩ ↩2 ↩3

  3. U.S. Geological Survey, “Circular 1217, Box A: Hydraulic Head and Factors Causing Changes in Ground Water Levels”. https://pubs.usgs.gov/circ/circ1217/html/boxa.html ↩ ↩2

  4. U.S. Geological Survey, “Circular 1186, Box A: Confined and Unconfined Aquifers Respond Differently to Pumping”. https://pubs.usgs.gov/circ/circ1186/html/boxa.html ↩ ↩2 ↩3