A ballistic coefficient is a parameter that combines an object’s aerodynamic drag properties with its mass for use in a drag model.

For spacecraft dynamics, one common convention is B = C_D A/m, with units of area per mass. Under that convention the drag acceleration is a_D = -1/2 rho B |v_rel| v_rel. The area is projected normal to the flow, and the relative velocity is measured against the atmosphere. NASA conjunction guidance and the ANDE density study use this convention.12

Because B does not identify the convention by itself, a NASA technical report instead defines B = C_D A/(2m), placing the factor of one-half inside the coefficient; its acceleration equation then omits that factor. These two B values differ by a factor of two. State the defining equation, units, reference area, mass convention and drag equation whenever a value is reported or exchanged.3

Attitude, projected area, drag coefficient, mass and surface conditions can change the effective coefficient. Orbit determination may estimate a fitted coefficient that absorbs density-model error as well as spacecraft-property error. Such an estimate is not automatically a physical measurement of C_D, area or mass.124

TLE BSTAR is a field in a specific mean-element data format. It should not be equated directly with a spacecraft’s physical C_D A/m without the associated propagation theory and reference assumptions. Preserve the distinction between a physical coefficient, an estimated parameter and a format-specific fitted term.56

Footnotes

  1. NASA, Spacecraft Conjunction Assessment and Collision Avoidance Best Practices Handbook. ↩ ↩2

  2. NASA/ILRS, Atmospheric density from the ANDE mission. ↩ ↩2

  3. NASA NTRS, Osculating-to-mean element conversion and ballistic coefficient. ↩

  4. GMAT, Spacecraft Ballistic/Mass Properties. ↩

  5. CCSDS, Orbit Data Messages, 502.0-B-3. ↩

  6. CelesTrak, NORAD Two-Line Element Set Format. ↩